MB-335試験問題集を使って一日でMicrosoft Certified: Dynamics 365試験合格目指す（最新の234解答) [Q22-Q38]

質問 22
You need to configure system attributes.
Which attribute types should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

質問 23
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen A client subcontracts production work to a vendor for production operations.
You need to model subcontracting of route operations in production orders.
Solution: Ensure that subcontracting of route operations supports back-flush costing.
Does the solution meet the goal?

Yes

No

質問 24
A company uses distributed hybrid topology within their Dynamics 365 Supply Chain Management system.
The company plans to build a manufacturing plant on a mountain to be closer to a required mineral source. Internet connectivity is unreliable, and availability of bandwidth speed is limited. The company plans to deploy an operational edge scale unit for the plant to address the connectivity issue.
You need to determine where production operations can be performed.
Which method should you recommend?
To answer, drag the appropriate methods to the correct requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

質問 25
An electronics manufacturing company is transitioning from infinite capacity planning to finite capacity planning to improve scheduling efficiency and manage resource constraints effectively.
The company observes that its manufacturing process typically requires a minimum lead time of five days.
The company requires finite capacity scheduling to create realistic production schedules that account for resource limitations over a defined minimum lead time of five days.
You need to implement finite capacity planning with a time fence that aligns with the five-day manufacturing lead time.
Solution: Disable finite capacity planning for all resources.
Does the solution meet the goal?

Yes

No

質問 26
You are building the Bill of materials (BOM) for a new production item. The new item has a subcomponent.
Subproduction orders for the subcomponent must be created when estimating production orders.
You need to configure the BOM line to generate sub production orders.
Which BOM line type should you use?

Vendor

Item

Phantom

Pegged supply

質問 27
A customer produces light projection toys for holiday decorations throughout the year. Because holidays vary by region and time of year, the company wants to implement Lean manufacturing.
The production process creates the toys at the following work cells: stands, main assembly, electric, visuals, and packaging. You need to implement the production process.
Which configuration options should you use? To answer, select the appropriate configuration options in the answer area. NOTE Each correct selection is worth one point.

質問 28
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
* Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.
* Create a vendor resource then create a work cell for outsourced painting and add the resource to the work cell.
* Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.
* Create a server term to tie the purchase agreement to the activity.
Does the solution meet the goal?

Yes

No

質問 29
You need to resolve the ModelA charging issue.
Which two configurations should you set on the work order finite capacity? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Ignore scheduled execution

Asset

Tool

Worker

Ignore schedule

質問 30
A manufacturer uses Dynamics 365 Supply Chain Management to create bicycle parts as a configure-to-order configuration. All bicycle parts are sourced from external sources and assembled in the manufacturing facility.
The manufacturer plans to expand its capabilities to create custom bicycles parts in an engineer-to-order model. All bicycle parts will be created in the manufacturing facility. The custom bicycle parts must be omitted from any master planning process.
You need to describe the concepts for the requirements.
Which concepts should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

質問 31
A company that assembles packaging material uses Dynamics 36S Supply Cham Management.
The glue that is used in assembly has run out of stock and will not be back in stock as expected. Another adhesive must be substituted for the glue. This will affect orders in planning as well as production orders that have started.
You need to ensure that the substitute adhesive is used in production until the glue is back in stock.
Which configuration should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection Is worth one point.

質問 32
A company uses distributed hybrid topology within their Dynamics 365 Supply Chain Management system.
The company plans to build a manufacturing plant on a mountain to be closer to a required mineral source.
Internet connectivity is unreliable, and availability of bandwidth speed is limited. The company plans to deploy an operational edge scale unit for the plant to address the connectivity issue.
You need to determine where production operations can be performed.
Which method should you recommend?
To answer, drag the appropriate methods to the correct requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Explanation:
To determine where production operations can be performed, you should recommend the following methods:
* Record the start of production: You should recommend the Production floor execution interface method. This method allows workers to register their daily work, such as when they start a job, report feedback about jobs, register indire ct activities, and report absence 1 . Workers can use the production floor execution interface to sign in with their badge IDs and select the jobs that they want to start from the All jobs tab 1 . They can also view the de tails and instructions for each job, and repor t good quantities and scrap 1 .
* Report the number of production units completed and finished goods put away: You should recommend the Production floor execution interface and Warehouse Management mobile app methods. These methods allow workers to report the completion of production jobs and the movement of finished goods to inventory. Workers c an use the production floor execution interface to complete a job by selecting it from the Active jobs tab and tapping Complete 1 . They can also print labels for the fin ished goods if required 2 . Workers can use the Warehouse Management mobile app to scan or enter license plates for the finished goods and put them away in a location 3 . They can also perform other warehouse operations, such as picking, packing, receiving, and cycle counting 3 .
* Report time spent training a new employee about line operation: You should recommend the Production floor execution interface method. This method allows workers to register indirect activities that are not related to a specific production job, such as training, meetings, or maintenance 1
. Workers can use the production floor execution interface to reg ister an indirect activity by tapp ing Indirect activity on the toolbar and selecting an activity type from the list 1 . The y can also enter a quantity or duration for the activity, and add a comment if needed 1 .
1 : How workers use the production floor execution interface 2 : Print labels 3 : Install and connect the Warehouse Management mobile a pp

質問 33
You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.
You need to set up a new item for the car audio system.
How should you create the new product? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.

質問 34
A company is implementing Dynamics 365 Supply Chain Management The company is a subcontractor that produces subassemblies for two major customers. CustomerA and Customers The company prioritizes CustomerA production orders to start on Mondays. The production orders may take several days to complete. Customers’ orders are produced throughout the week, after CustomerA orders are completed. Work in process (W1P) must be calculated and consolidated for CustomerA and CustomerB respectively on the financial reports.
You need to configure the production requirements.
What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

質問 35
A company uses Dynamics 365 Supply Chain Management.
The marketing group needs to be able to view a manufacturer’s suggested retail price (MSRP) for a new bill of materials (BOM) item when the cost of the BOM item is calculated.
You need to configure the functionality.
What should you do?

Set the sales price model field on the calculation group to item sales price.

Use the category price rules to generate a trade agreement with the sales price.

Add a profit setting percentage to a calculation group.

Add a profit setting percentage to the released BOM product.

Add a profit setting percentage to a cost group.

To view the manufacturer’s suggested retail price (MSRP) for a new bill of materials (BOM) item, you need to configure a calculation group with a profit setting percentage. A calculation group is a group of settings that determine how the cost and sales price of a BOM item are calculated1. A profit setting percentage is a percentage that is added to the cost of a BOM item to calculate the sales price2. You can specify a profit setting percentage for each calculation group on the Calculation groups page3.
When you calculate the cost and sales price of a BOM item, you must select a calculation group on the Calculations page. The calculation group determines the cost model and sales price model that are used for the BOM calculation. The cost model defines how the cost of the BOM item is calculated based on the cost categories and cost groups of the components and operations. The sales price model defines how the sales price of the BOM item is calculated based on the profit setting percentage and the cost model.
By using a calculation group with a profit setting percentage, you can view the MSRP for a new BOM item when you calculate its cost and sales price. The MSRP will be shown as the calculated sales price on the Calculate item cost page. You can also view the calculation details and see how the profit setting percentage is applied to the cost of the BOM item.
The other options are not correct, because they do not allow you to view the MSRP for a new BOM item when you calculate its cost. Setting the sales price model field on the calculation group to item sales price would use the existing sales price of the BOM item from the Item price page, instead of calculating a new sales price based on a profit setting percentage. Using the category price rules to generate a trade agreement with the sales price would create a trade agreement line for the BOM item based on its category, but it would not show the MSRP when you calculate its cost. Adding a profit setting percentage to the released BOM product or to a cost group would have no effect, because these entities do not affect how the sales price of a BOM item is calculated.
1: Calculation groups 2: Profit settings 3: Create or modify calculation groups : [BOM calculations] : [Cost models and sales price models] : [Calculate costs and prices for manufactured items] : [Category pricing rules]

質問 36
You need to resolve the production manager issue.
How should you configure manufacturing execution? To answer, select the appropriate option in the answer area.
NOTE:Each correct selection is worth one point.

質問 37
A manufacturing company uses the production control module in Dynamics 365 Supply Chain Management.
A production planner at the company must prevent resources from being allocated to multiple tasks simultaneously when the resources are already engaged in a task. You need to enable the property on the operation resource master. Which property should you enable?

Finite capacity

Exclusive

Job scheduling

Bottleneck resource

質問 38
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.