[2023年02月15日] 無料ダウンロードCisco 300-610リアル試験問題 [Q81-Q96]

81、An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?

82、Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?

83、A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

84、An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

85、Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

86、An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes. Which solution should be implemented in the design?

87、An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?

88、An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations.
Which two features must be used to prevent these situations from happening in the future? (Choose two.)

89、Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

90、A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)

91、A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

92、An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company’s strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
* The customer’s security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
* The port should support management over IP.
Which port type must be used to meet these requirements?

93、An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP. Which solution should be included in the design?

94、What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

95、Drag and drop the configurations from the left onto the correct policies on the right.

96、What is an advantage of using OTV as compared to VPLS for data center redundancy?