350-701試験問題を今すぐ試そう！最新の[2022年最新] 正解回答付き [Q170-Q184]

Explanation
Explanation
Each rule also has an action, which determines whether you monitor, trust, block, or allow matching traffic.
Note: With action “trust”, Firepower does not do any more inspection on the traffic. There will be no intrusion protection and also no file-policy on this traffic.

The RADIUS Change of Authorization (CoA) feature provides a mechanism to change the attributes of an authentication, authorization, and accounting (AAA) session after it is authenticated. Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/15-sy/sec-usr-aaa-15- sy-book/sec-rad-coa.html authentication, authorization, and accounting (AAA) session after it is authenticated.
Reference:
The RADIUS Change of Authorization (CoA) feature provides a mechanism to change the attributes of an authentication, authorization, and accounting (AAA) session after it is authenticated. Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/15-sy/sec-usr-aaa-15- sy-book/sec-rad-coa.html

SSL Decryption is an important part of the Umbrella Intelligent Proxy. he feature allows the Intelligent Proxy to go beyond simply inspecting normal URLs and actually proxy and inspect traffic that’s sent over HTTPS. The SSL Decryption feature does require the root certificate be installed.
SSL Decryption is an important part of the Umbrella Intelligent Proxy. he feature allows the Intelligent Proxy to go beyond simply inspecting normal URLs and actually proxy and inspect traffic that’s sent over HTTPS. The SSL Decryption feature does require the root certificate be installed.
Reference:
SSL Decryption is an important part of the Umbrella Intelligent Proxy. he feature allows the Intelligent Proxy to go beyond simply inspecting normal URLs and actually proxy and inspect traffic that’s sent over HTTPS. The SSL Decryption feature does require the root certificate be installed.

Explanation
To configure an NTP enabled router to require authentication when other devices connect to it, use the following commands:
NTP_Server(config)#ntp authentication-key 2 md5 securitytut
NTP_Server(config)#ntp authenticate
NTP_Server(config)#ntp trusted-key 2
Then you must configure the same authentication-key on the client router:
NTP_Client(config)#ntp authentication-key 2 md5 securitytut
NTP_Client(config)#ntp authenticate
NTP_Client(config)#ntp trusted-key 2
NTP_Client(config)#ntp server 10.10.10.1 key 2
Note: To configure a Cisco device as a NTP client, use the command ntp server <IP address>. For example:
Router(config)#ntp server 10.10.10.1. This command will instruct the router to query 10.10.10.1 for the time.

The following are the prerequisites to integrate Active Directory with Cisco ISE.
+ Use the Network Time Protocol (NTP) server settings to synchronize the time between the Cisco ISE server and Active Directory. You can configure NTP settings from Cisco ISE CLI.
+ If your Active Directory structure has multidomain forest or is divided into multiple forests, ensure that trust relationships exist between the domain to which Cisco ISE is connected and the other domains that have user and machine information to which you need access. For more information on establishing trust relationships, refer to Microsoft Active Directory documentation.
+ You must have at least one global catalog server operational and accessible by Cisco ISE, in the domain to which you are joining Cisco ISE.
The following are the prerequisites to integrate Active Directory with Cisco ISE.
+ Use the Network Time Protocol (NTP) server settings to synchronize the time between the Cisco ISE server and Active Directory. You can configure NTP settings from Cisco ISE CLI.
+ If your Active Directory structure has multidomain forest or is divided into multiple forests, ensure that trust relationships exist between the domain to which Cisco ISE is connected and the other domains that have user and machine information to which you need access. For more information on establishing trust relationships, refer to Microsoft Active Directory documentation.
+ You must have at least one global catalog server operational and accessible by Cisco ISE, in the domain to which you are joining Cisco ISE.
The following are the prerequisites to integrate Active Directory with Cisco ISE.
+ Use the Network Time Protocol (NTP) server settings to synchronize the time between the Cisco ISE server and Active Directory. You can configure NTP settings from Cisco ISE CLI.
+ If your Active Directory structure has multidomain forest or is divided into multiple forests, ensure that trust relationships exist between the domain to which Cisco ISE is connected and the other domains that have user and machine information to which you need access. For more information on establishing trust relationships, refer to Microsoft Active Directory documentation.
+ You must have at least one global catalog server operational and accessible by Cisco ISE, in the domain to which you are joining Cisco ISE.
Reference:
b_ISE_AD_integration_2x.html#reference_8DC463597A644A5C9CF5D582B77BB24F b_ISE_AD_integration_2x.html#reference_8DC463597A644A5C9CF5D582B77BB24F

The various suspicious patterns for which the Cisco Tetration platform looks in the current release are:
+ Shell code execution: Looks for the patterns used by shell code.
+ Privilege escalation: Watches for privilege changes from a lower privilege to a higher privilege in the process lineage tree.
+ Side channel attacks: Cisco Tetration platform watches for cache-timing attacks and page table fault bursts.
Using these, it can detect Meltdown, Spectre, and other cache-timing attacks.
+ Raw socket creation: Creation of a raw socket by a nonstandard process (for example, ping).
+ User login suspicious behavior: Cisco Tetration platform watches user login failures and user login methods.
+ Interesting file access: Cisco Tetration platform can be armed to look at sensitive files.
+ File access from a different user: Cisco Tetration platform learns the normal behavior of which file is accessed by which user.
+ Unseen command: Cisco Tetration platform learns the behavior and set of commands as well as the lineage of each command over time. Any new command or command with a different lineage triggers the interest of the Tetration Analytics platform.

The following are the prerequisites to integrate Active Directory with Cisco ISE.
+ Use the Network Time Protocol (NTP) server settings to synchronize the time between the Cisco ISE server and Active Directory. You can configure NTP settings from Cisco ISE CLI.
+ If your Active Directory structure has multidomain forest or is divided into multiple forests, ensure that trust relationships exist between the domain to which Cisco ISE is connected and the other domains that have user and machine information to which you need access. For more information on establishing trust relationships, refer to Microsoft Active Directory documentation.
+ You must have at least one global catalog server operational and accessible by Cisco ISE, in the domain to which you are joining Cisco ISE.
Reference:
/b_ISE_AD_integration_2x.html#reference_8DC463597A644A5C9CF5D582B77BB24F