[2024年11月] 更新されたのはSY0-701日本語問題集PDFオンラインエンジン [Q107-Q130]

Tuning is the activity of adjusting the configuration or parameters of a security tool or system to optimize its performance and reduce false positives or false negatives. Tuning can help to filter out the normal or benign activity that is detected by the security tool or system, and focus on the malicious or anomalous activity that requires further investigation or response. Tuning can also help to improve the efficiency and effectiveness of the security operations center by reducing the workload and alert fatigue of the analysts. Tuning is different from aggregating, which is the activity of collecting and combining data from multiple sources or sensors to provide a comprehensive view of the security posture. Tuning is also different from quarantining, which is the activity of isolating a potentially infected or compromised device or system from the rest of the network to prevent further damage or spread. Tuning is also different from archiving, which is the activity of storing and preserving historical data or records for future reference or compliance. The act of ignoring detected activity in the future that is deemed normal by the security operations center is an example of tuning, as it involves modifying the settings or rules of the security tool or system to exclude the activity from the detection scope.
Therefore, this is the best answer among the given options. References = Security Alerting and Monitoring Concepts and Tools – CompTIA Security+ SY0-701: 4.3, video at 7:00; CompTIA Security+ SY0-701 Certification Study Guide, page 191.

Endpoint detection and response (EDR) is a technology that monitors and analyzes the activity and behavior of endpoints, such as computers, laptops, mobile devices, and servers. EDR can help to detect and prevent malicious software, such as viruses, malware, and Trojans, from infecting the endpoints and spreading across the network. EDR can also provide visibility and response capabilities to contain and remediate threats. EDR is different from IDS, which is a network-based technology that monitors and alerts on network traffic anomalies. EDR is also different from ACL, which is a list of rules that control the access to network resources. EDR is also different from NAC, which is a technology that enforces policies on the network access of devices based on their identity and compliance status.

The most likely way a rogue device was able to connect to the network is through a MAC cloning attack. In this attack, a personal device copies the MAC address of an authorized device, bypassing the 802.1X access control that relies on known hardware addresses for network access. The matching MAC addresses in the audit report suggest that this technique was used to gain unauthorized network access.
References =
* CompTIA Security+ SY0-701 Course Content: Domain 03 Security Architecture.
* CompTIA Security+ SY0-601 Study Guide: Chapter on Network Security and MAC Address Spoofing.

Patch availability most impacts an administrator’s ability to address Common Vulnerabilities and Exposures (CVEs) discovered on a server. If a patch is not available for a discovered vulnerability, the administrator cannot remediate the issue directly through patching, which leaves the system exposed until a patch is released.
Patch availability: Directly determines whether a discovered vulnerability can be fixed promptly. Without available patches, administrators must look for other mitigation strategies.
Rescanning requirements: Important for verifying the effectiveness of patches but secondary to the availability of the patches themselves.
Organizational impact: Considers the potential consequences of vulnerabilities but does not directly impact the ability to apply patches.
Risk tolerance: Influences how the organization prioritizes addressing vulnerabilities but does not affect the actual availability of patches.

Conducting a site survey is crucial when deploying new security cameras because it allows the technician to assess various factors such as the physical environment, potential obstacles, optimal camera placement, coverage areas, and lighting conditions. This ensures that the security camera is installed in the most effective location to fulfill its surveillance objectives.

Brute force is a type of attack that tries to guess the password or other credentials of a user account by using a large number of possible combinations. An attacker can use automated tools or scripts to perform a brute force attack and gain unauthorized access to the account. The domain activity logs show that the user ismith has failed to log in 10 times in a row within a short period of time, which is a strong indicator of a brute force attack. The logs also show that the source IP address of the failed logins is different from the usual IP address of ismith, which suggests that the attacker is using a different device or location to launch the attack. The security analyst should take immediate action to block the attacker’s IP address, reset ismith’s password, and notify ismith of the incident. Reference = CompTIA Security+ Study Guide with over 500 Practice Test Questions: Exam SY0-701, 9th Edition, Chapter 1, page 14. CompTIA Security+ (SY0-701) Certification Exam Objectives, Domain 1.1, page 2. Threat Actors and Attributes – SY0-601 CompTIA Security+ : 1.1

Secured zones are a key component of the Zero Trust data plane, which is the layer where data is stored, processed, and transmitted. Secured zones are logical or physical segments of the network that isolate data and resources based on their sensitivity and risk. Secured zones enforce granular policies and controls to prevent unauthorized access and lateral movement within the network1.
References: CompTIA Security+ Certification Kit: Exam SY0-701, 7th Edition, Chapter 5, page 255.

Access control lists (ACLs) are rules that specify which users or groups can access which resources on a file server. They can help restrict access to confidential data by granting or denying permissions based on the identity or role of the user. In this case, the administrator can use ACLs to quickly modify the access rights of the users and prevent them from accessing the data they are not authorized to see. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, page 308 1

A hash is an algorithm used to verify data integrity by generating a fixed-size string of characters from input data. If even a single bit of the input data changes, the hash value will change, allowing users to detect any modification to the data. Hashing algorithms like SHA-256 and MD5 are commonly used to ensure data has not been altered.
References:
* CompTIA Security+ SY0-701 Course Content: Domain 6: Cryptography and PKI, which discusses the role of hashing in verifying data integrity.

A UPS (Uninterruptible Power Supply) would most likely mitigate the impact of an extended power outage on a company’s environment. A UPS provides backup power and ensures that systems continue to run during short-term power outages, giving enough time to perform an orderly shutdown or switch to a longer-term power solution like a generator.
Hot site: A fully operational offsite data center that can be used if the primary site becomes unavailable. It’s more suitable for disaster recovery rather than mitigating short-term power outages.
UPS: Provides immediate backup power, protecting against data loss and hardware damage during power interruptions.
Snapshots: Used for data backup and recovery, not for power outage mitigation.
SOAR (Security Orchestration, Automation, and Response): A platform for automating security operations, not related to power outage mitigation.

Air-gapping is the most effective way to protect an application server running unsupported software from network threats. By physically isolating the server from any network connection (no wired or wireless communication), it is protected from external cyber threats. While other options like port security or a screened subnet can provide some level of protection, an air gap offers the highest level of security by preventing any network-based attacks entirely.
References =
* CompTIA Security+ SY0-701 Course Content: Domain 03 Security Architecture.
* CompTIA Security+ SY0-601 Study Guide: Chapter on Secure System Design.

EAP-TLS is a strong and secure authentication method that involves the use of digital certificates, typically stored on smart cards, for user authentication. It requires the user to present a valid certificate, which is verified by the authentication server, providing a high level of security.

When a legacy device is no longer receiving updates or patches, it is considered to be at the end of life (EOL)
. This means the manufacturer has ceased support for the device, and it will no longer receive updates, security patches, or technical assistance. EOL devices pose security risks and are often decommissioned or replaced.
* End of support may seem similar but typically refers to the cessation of technical support, whereas EOL means the device is fully retired.
* End of business and End of testing do not apply in this context.

It asks about the Data plane not the control plane, which includes implicit trust zones, systems and subjects, and policy enforcement points.

Analysis is the incident response activity that describes the process of understanding the source of an incident. Analysis involves collecting and examining evidence, identifying the root cause, determining the scope and impact, and assessing the threat actor’s motives and capabilities.
Analysis helps the incident response team to formulate an appropriate response strategy, as well as to prevent or mitigate future incidents. Analysis is usually performed after detection and before containment, eradication, recovery, and lessons learned.

Active reconnaissance is a type of reconnaissance that involves sending packets or requests to a target and analyzing the responses. Active reconnaissance can reveal information such as open ports, services, operating systems, and vulnerabilities. However, active reconnaissance is also more likely to be detected by the target or its security devices, such as firewalls or intrusion detection systems. Port and service scans are examples of active reconnaissance techniques, as they involve probing the target for specific information.

The correct answer is D because it allows only the device with the IP address 10.50.10.25 to send outbound DNS requests on port 53, and denies all other devices from doing so. The other options are incorrect because they either allow all devices to send outbound DNS requests (A and C), or they allow no devices to send outbound DNS requests (B).

Capacity planning is the process of determining the resources needed to meet the current and future demands of an organization. Capacity planning can help a company develop a business continuity strategy by estimating how many staff members would be required to sustain the business in the case of a disruption, such as a natural disaster, a cyberattack, or a pandemic.
Capacity planning can also help a company optimize the use of its resources, reduce costs, and improve performance.

Counterfeit hardware is hardware that is built or modified without the authorization of the original equipment manufacturer (OEM). It can pose serious risks to network quality, performance, safety, and reliability12. Counterfeit hardware can also contain malicious components that can compromise the security of the network and the data that flows through it3. To address the risks associated with procuring counterfeit hardware, a company should conduct a thorough analysis of the supply chain, which is the network of entities involved in the production, distribution, and delivery of the hardware. By analyzing the supply chain, the company can verify the origin, authenticity, and integrity of the hardware, and identify any potential sources of counterfeit or tampered products. A thorough analysis of the supply chain can include the following steps:
Establishing a trusted relationship with the OEM and authorized resellers Requesting documentation and certification of the hardware from the OEM or authorized resellers Inspecting the hardware for any signs of tampering, such as mismatched labels, serial numbers, or components Testing the hardware for functionality, performance, and security Implementing a tracking system to monitor the hardware throughout its lifecycle Reporting any suspicious or counterfeit hardware to the OEM and law enforcement agencies Reference = 1: Identify Counterfeit and Pirated Products – Cisco, 2: What Is Hardware Security? Definition, Threats, and Best Practices, 3: Beware of Counterfeit Network Equipment – TechNewsWorld, : Counterfeit Hardware: The Threat and How to Avoid It

Password spraying is a type of brute-force attack used to gain unauthorized access to user accounts by systematically attempting a small number of commonly used passwords against many user accounts. Unlike traditional brute-force attacks, which attempt many different passwords against a single user account, password spraying involves trying a few commonly used passwords against a large number of accounts.

The vulnerability likely present in the application that is storing data using MD5 is a cryptographic vulnerability. MD5 is considered to be a weak hashing algorithm due to its susceptibility to collision attacks, where two different inputs produce the same hash output, compromising data integrity and security.
Cryptographic: Refers to vulnerabilities in cryptographic algorithms or implementations, such as the weaknesses in MD5.
Malicious update: Refers to the intentional injection of harmful updates, not related to the use of MD5.
Zero day: Refers to previously unknown vulnerabilities for which no patch is available, not specifically related to MD5.
Side loading: Involves installing software from unofficial sources, not directly related to the use of MD5.

An engineer should recommend the decommissioning of a network device when the device poses a security risk or a compliance violation to the enterprise environment. A device that cannot meet the encryption standards or receive authorized updates is vulnerable to attacks and breaches, and may expose sensitive data or compromise network integrity. Therefore, such a device should be removed from the network and replaced with a more secure and updated one.
Reference
CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 2, Section 2.2, page 671 CompTIA Security+ Practice Tests: Exam SY0-701, 3rd Edition, Chapter 2, Question 16, page 512

A brute-force attack is a type of attack that involves systematically trying all possible combinations of passwords or keys until the correct one is found. The log file shows multiple failed login attempts in a short amount of time, which is a characteristic of a brute-force attack. The attacker is trying to guess the password of the Administrator account on the server. The log file also shows the event ID 4625, which indicates a failed logon attempt, and the status code 0xC000006A, which means the user name is correct but the password is wrong. These are indicators of compromise (IoC) that suggest a brute-force attack is taking place. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, page 215-216 and 223 1

A web filter is a device or software that can monitor, block, or allow web traffic based on predefined rules or policies. One of the common methods of web filtering is to scan the URL for strings and deny access when matches are found. For example, a web filter can block access to websites that contain the words “gambling”, “porn”, or “malware” in their URLs. A URL is a uniform resource locator that identifies the location and protocol of a web resource. A URL typically consists of the following components: protocol://domain:port/path?query#fragment. The protocol specifies the communication method used to access the web resource, such as HTTP, HTTPS, FTP, or SMTP. The domain is the name of the web server that hosts the web resource, such as www.google.com or www.bing.com. The port is an optional number that identifies the specific service or application running on the web server, such as 80 for HTTP or 443 for HTTPS. The path is the specific folder or file name of the web resource, such as /index.html or /images/logo.png. The query is an optional string that contains additional information or parameters for the web resource, such as ?q=security or ?lang=en. The fragment is an optional string that identifies a specific part or section of the web resource, such as #introduction or #summary.
To prohibit access to non-encrypted websites, an analyst should employ a search string that matches the protocol of non-encrypted web traffic, which is HTTP. HTTP stands for hypertext transfer protocol, and it is a standard protocol for transferring data between web servers and web browsers. However, HTTP does not provide any encryption or security for the data, which means that anyone who intercepts the web traffic can read or modify the data. Therefore, non-encrypted websites are vulnerable to eavesdropping, tampering, or spoofing attacks. To access a non-encrypted website, the URL usually starts with http://, followed by the domain name and optionally the port number. For example, http://www.example.com or http://www.example.com:80. By scanning the URL for the string http://, the web filter can identify and block non-encrypted websites.
The other options are not correct because they do not match the protocol of non-encrypted web traffic. Encryption=off is a possible query string that indicates the encryption status of the web resource, but it is not a standard or mandatory parameter. Https:// is the protocol of encrypted web traffic, which uses hypertext transfer protocol secure (HTTPS) to provide encryption and security for the data. Www.*.com is a possible domain name that matches any website that starts with www and ends with .com, but it does not specify the protocol. :443 is the port number of HTTPS, which is the protocol of encrypted web traffic. Reference = CompTIA Security+ Study Guide (SY0-701), Chapter 2: Securing Networks, page 69. Professor Messer’s CompTIA SY0-701 Security+ Training Course, Section 2.1: Network Devices and Technologies, video: Web Filter (5:16).